Simultaneous Measurement

Support of quick and easy measurementsThere are many functions to express characteristics of vibration. However it is necessary for the conventional vibrometers that the same point is measured plural times switching objective functions one by one. SmartVibro which has a simultaneous measurement function can measure Acceleration, Velocity and Displacement simultaneously by just pressing the measurement start key one time. It can reduce the operating time and prevent miss-measurements. By switching the screen, VM-4424S・VM4424H can confirm Acceleration Envelope for bearing condition which enables small scars to be found easily.

 

OA screen:
（Display of velocity value）

LCD screen with high functionality

High intuitive operationBesides of touch panel, Smart Vibro is equipped with a variety of functions which makes an operation in various scenes much easier, such as a backlit screen which illuminates in dark place, a contrast control and zoom in function of measurement value.

 

FFT Analysis screen:
If the measured magnitude of
vibration is too large,
cause investigation by FFT is
recommended.

FFT Analysis function* VM-4024H,VM-3024H,VM-7024H only

For investigation of cause of vibrationSmartVibro is possible to perform Frequency Analysis by the minimum condition setting.

 

SD card data saving* VM-4024H,VM-3024H,VM-7024H only

Crucial data saving function for recording and maintenance.Waveform data saving is possible in data saving mode. Waveform data saved in SC card can be transferred to P.C.

 

［SD card］
Memory capacity 2GB. About 1000 files can be saved (1 file data for 5 seconds).

SmartVibro Function Table

Model		Smart Vibro VM-4424S	Smart Vibro VM-4424H	SmartVibro VM-3024H	Smart Vibro VM-7024H
Three usable pickups		Piezoelectric Type		Electro-dynamic Type	Piezo-resistive Type
Type		Standard	High-end	High-end	High-end
Usablility	Simultaneous Measurement	○	○	○	○
	Waveform Data		○	○	○
	FFT analysis is necessary		○	○	○
Object	Motor, Blower, Pump	○	○	○
	Turbine			○
	Generator			○
	Mixer, Centrifuge				○
	Crane, Bridge				○
	Floor, Ground				○

Model		SmartVibro VM-4424S	SmartVibro VM-4424H	SmartVibro VM-3024H	SmartVibro  VM-7024H
Three usable pickups		Piezoelectric Typ		Electro-dynamic Type	Piezo-resistive Type
Frequency Range		5Hz ～ 10kHz（Acceleration） 10Hz ～ 1kHz（Velocity） 10Hz ～ 150Hz（Displacement） 1kHz ～ 10kHz（Bearing） 3Hz ～ 1kHz（H-function）		10Hz ～ 1kHz （Acceleration, velocity and displacement ）	0.3Hz ～ 100Hz （Acceleration） 3Hz ～ 100Hz （Velocity and displacement）
Full Scale		Acceleration, velocity and displacement： 6 Range, Automatic Switching Bearing： 6 Range, Automatic Switching H-function： 6 Range, Automatic Switching		Acceleration： 6 Range, Automatic Switching Velocity： 6 Range, Automatic Switching Displacement： 6 Range, Automatic Switching	Acceleration： 6 Range, Automatic Switching Velocity： 6 Range, Automatic Switching Displacement： 6 Range, Automatic Switching
Max. measurable range		Acceleration, H-function： 300m/s2（RMS、EQP、PEAK） Velocity： 1000mm/s（RMS、EQP、PEAK） Displacement： 10mm（p-p）		Acceleration： 100m/s2（RMS、EQP、PEAK） Velocity： 200mm/s（RMS、EQP、PEAK） Displacement： 1mm（p-p）	Acceleration： 20m/s2（RMS、EQP、PEAK） Velocity： 100mm/s（RMS、EQP、PEAK） Displacement： 10mm（p-p）
Sampling Frequency		51,200Hz		20,480Hz	4,096Hz
Indication		PEAK：Acceleration, velocity and displacement EQP：Acceleration, velocity and displacement RMS：Acceleration, velocity		PEAK：Acceleration, velocity and displacement EQP：Acceleration, velocity and displacement RMS：Acceleration, velocity	PEAK：Acceleration, velocity and displacement EQP：Acceleration, velocity and displacement RMS：Acceleration, velocity
Accuracy	Frequency Response	±5%(10Hz ～ 5kHz) ±30%(5Hz ～ 10Hz, 5k ～ 10kHz)		±5%(20Hz ～ 500Hz) +5% -15% (10Hz ～ 20Hz, 500 ～ 1000Hz)	±5%(0.3Hz ～ 100Hz)
	Sensitivity Error	±5% (for Full Scale value at 160Hz)		±5% (for Full Scale value at 80Hz)	±5% (for Full Scale value at 16Hz)
	Range Changeover Error	±2%(160Hz Standard)		±2%(80Hz Standard)	±2%(16Hz Standard)
	Linearity	±1% (for Full Scale value at 160Hz)		±0.5% (for Full Scale value at 80Hz)	±1.5% (for Full Scale value at 16Hz)
Output		AC OUT： 0 ～ ±1V(Load 10kΩ or higher) DC OUT： 0 ～ +1V(Load 10kΩ or higher)		AC OUT： 0 ～ ±1V(Load 10kΩ or higher) DC OUT： 0 ～ +1V(Load 10kΩ or higher)	AC OUT： 0 ～ ±1V(Load 10kΩ or higher) DC OUT： 0 ～ +1V(Load 10kΩ or higher)
Language		Japanese, English, Chinese (Switching)		Japanese, English, Chinese (Switching)	Japanese, English, Chinese (Switching)
Power Supply		Battery: AA ×2 pcs. (Continuous duty approx. 20 hours)		Battery: AA ×2 pcs. (Continuous duty approx. 20 hours)	Battery: AA ×2 pcs. (Continuous duty approx. 20 hours)
Size/Mass of Body Unit		74(W)×32.5(D)×148(H)mm Approx. 230g(Including Battery)		74(W)×32.5(D)×148(H)mm Approx. 230g(Including Battery)	74(W)×32.5(D)×148(H)mm Approx. 230g(Including Battery)
Size/Mass of Pickup		Piezoelectric acceleration sensor φ19×42(L)mm　40g(Pickup) φ6×185(L)mm　70g(Probe)		Electro-dynamic velocity pickup φ25.8×50(L)mm　140g(Pickup) φ8×50(L)mm　20g(Probe)	Piezo-resistive acceleration pickup 45(W)×45(D)×45(H)mm　200g(Pickup)
FFT analysis		－	△f:25Hz、12.5Hz、6.25Hz	△f:10Hz、5Hz、2.5Hz	△f:1Hz、0.5Hz、0.25Hz
Memory		－	SD card Waveform data acquisition Saving Time：0.1Sec./0.2 Sec./0.5 Sec./1 Sec. Sampling Frequency：51,200Hz	SD card Waveform data acquisition Saving Time：1Sec./2 Sec./5 Sec./10 Sec. Sampling Frequency：10,240Hz	SD card Waveform data acquisition Saving Time：5Sec./10Sec./ 25 Sec./50 Sec. Sampling Frequency：2,048Hz
Option		●Small size strong magnet (for flat surface) MH-201R （ø20x11mm） ●Small size strong magnet (for spherical surface) MH-203R （ø24x20mm）		●Small size strong magnet (for flat surface) MH-202R （ø24×10.5mm） ●Small size strong magnet (for spherical surface) MH-203R （ø24x20mm）	●magnet MB-PB
		●Long cable   LC-4 (4m)		●Extention cable   CE-3024-3 (3m) CE-3024-6 (6m) CE-3024-10 (10m)	●Long cable   CE-7000 (10m)
		●Rubber jacket PC-3024   ●AC adapter　PS-3024-3 ●Carrying case　C-3024

* The screen contents, specs. or exteriors are subject to change without notice.
* Vibrometer (Model:VM-3024S) will no longer be sold from September 30th, 2014. Alternative product will be “VM-3024H”.